Термопроводящ пад Thermal Grizzly Phasesheet PTM 50 x 40 x 0.2 mm for CPU

12.00/ 23.47 лв.
Спечели 12 точки с тази покупка
Наличен във външен склад

Продуктът е наличен във външен склад.
📦 Срок за доставка: Обикновено 1 до 3 работни дни.
Поръчки след 15:00 ч. се обработват на следващия работен ден.
⚠️ Важно: Посоченият срок е ориентировъчен. В случай на забавяне или невъзможност за доставка, екипът на PCBUILD ще ви информира своевременно.

Код: 49432
Добави в количката Бърза поръчка Добави в любими Премахни от любими
Купи на изплащане

The phase-change material on which the PhaseSheet PTM is based is solid at room temperature. The material only begins to liquefy at temperatures above 45 degrees Celsius. A high contact pressure of around 300-400N is required for optimum distribution of the liquid PhaseSheet PTM and thus the lowest possible layer thickness. PhaseSheet PTM has a very low viscosity in its liquid state and contracts again when it changes to a solid material, thus minimizing the pump-out effect.

The pump-out effect is particularly pronounced when combining a copper cooler on a graphics chip because silicon and copper have different linear expansion when heated. The temperatures under load cause the heatspreader and the base plate to deform (concave or convex) and return to their original shape (straight) when they cool down. As a result, the thermal paste is slowly pressed out between the heatspreader and the base plate of the CPU cooler, for example.

  • Outstanding thermal conductivity
  • Consistently high performance
  • Very long service life
  • Versatile in application
  • Not electrically conductive
  • Easy to use

PhaseSheet PTM is more durable than traditional thermal pastes, but not as durable as KryoSheet, for example, which is virtually maintenance-free. PhaseSheet PTM develops and stabilizes its maximum thermal conductivity after around ten thermal cycles above 60 degrees Celsius.

Производител
Thermal Grizzly
Вид Термо пад
Продуктов код TG-PS-50-40
Количество/Тегло 1бр
Лимитна температура -75°C to 150°C
Тип Термопад
Цвят Сив
Термопад размер 50 x 40 mm
Термопад дебелина 0.2 mm
Гаранция 0 месеца
Все още няма ревюта за този продукт. Бъди първи!

Подобни продукти

Този уеб сайт използва бисквитки, за показване съдържанието на сайта и подобряване на потребителското изживяване. Повече информация за „бисквитките“ може да намерите в раздела Политика за използване на бисквитки
Разбирам